WOP-2ac-LR2. User manual
36
•
•
•
•
•
•
•
•
4.8 The 'WDS' menu
In the 'WDS' menu, you configure wireless bridges between WOP-2ac-LR2.
4.8.1 The 'WDS' submenu
Enabled
– when the flag is set, the wireless bridge mode is enabled; otherwise, it is disabled;
Security
– wireless network access security mode:
Off
– do not use encryption for data transfer.
WPA2
–
encryption method for which the following setting is available:
WPA Key
– key/password required to connect to the
opposite
access point. The key length
is from 8 to 63 characters.
Link X (where X=0..7)
–
enable wireless bridge link;
MAC –
MAC address of the opposite device to which the wireless bridge is configured;
Fixed Transmit Rate
– fixed wireless data transmission rate which is defined by IEEE 802.11b/g/n
standards. For each link is selected individually.
To apply the new configuration and save the settings to the non-volatile memory, click 'Apply'. To cancel the
changes click the 'Cancel' button.
When configuring a WDS connection, it is necessary that on the devices that will be connected via
WDS, the same channel and channel width are selected in the radio interface settings.
