WOP-2ac-LR2. User manual
5
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2 Device description
2.1 Purpose
The base station WOP-2ac-LR2 (herein after 'the device') is designed to provide broadband Internet access to
subscribers within a range of up to 3 km
and to organize wireless bridges (WDS).
The base station – an up-to-date flexible solution that provides extending coverage zone due to its power of
the transmitter (up to 26 dBm) and sectoral antennas. It is possible to deploy wireless IT infrastructure fast
and easily by virtue of high-performance hardware, scalability and intuitive interface.
The PoE+ technology makes it possible to install the equipment virtually anywhere, regardless of the power
supply location, reduces total cost by discarding power cables and performs the installation easier and faster.
2.2 Device specification
Interfaces:
1 Combo port 10/100/1000BASE-T (Ethernet)/100/1000Base-X (SFP);
2 SMA (female) connectors for connecting external antennas. The choice of model depends on the use
of the access point: for wireless bridges, it is preferable to choose narrowly oriented antennas, and in
base station mode, sector antennas with a wider radiation pattern;
Wi-Fi 2.4 GHz IEEE 802.11b/g/n.
The power is supplied via PoE injector (IEEE 802.3at-2009).
Functions:
WLAN capabilities:
support for IEEE 802.11b/g/n;
data aggregation, including A-MPDU (Tx /Rx) and
А
-MSDU (Rx);
WMM-based priorities and packet planning;
support for hidden SSID;
4 virtual access points;
MAC ACL;
external access point detection;
APSD;
spectrum analyzer;
support for wireless bridges (WDS);
Polling;
support for fixed center frequency.
Network functions:
autonegotiation of speed, duplex mode and switching between MDI and MDI-X modes;
support for VLAN (Access, Trunk, General);
DHCP client;
support for NTP;
support for Syslog.
QoS functions
bandwidth limiting for each SSID;
client data rate limiting for each SSID;
changing WMM parameters for each radio interface;
support for prioritization by CoS and DSCP;
