WOP-2ac-LR2. User manual
38
•
•
•
•
•
4.9.2 The 'Access' submenu
In the 'Access' submenu, you can configure access to the device via the web interface, Telnet, SSH, NETCONF
and SNMP.
To enable access to the device via the web interface via HTTP protocol, set the flag next to 'WEB'. In the
window that appears, it is possible to change the HTTP port (by default, 80). The range of acceptable
values of ports, in addition to the default, from 1025 to 65535 inclusive;
To enable access to the device via the web interface via HTTPS protocol, set the flag next to 'WEB-
HTTPS'. In the window that appears, it is possible to change the HTTPS port (by default, 443). The range
of acceptable values of ports, in addition to the default, from 1025 to 65535 inclusive;
To enable access to the device via Telnet, check the box next to 'Telnet';
To enable access to the device via SSH, check the box next to 'SSH';
To enable access to the device via NETCONF, check the box next to 'NETCONF';
WOP-2ac-LR2
software allows monitoring of the device status and its sensors via SNMP. The device supports
SNMPv1, SNMPv2.
Note that the ports for the HTTP and HTTPS protocols should not have the same value.
