WOP-2ac-LR2. User manual
30
•
•
•
•
•
•
•
•
•
In the 'Advanced' submenu, you can configure advanced device’s radio interface parameters.
OBSS Coexistence
– automatic channel bandwidth reduction when the air is loaded. When the flag is set,
the mode is enabled;
Short Guard interval
– support for Short Guard interval. Access point transmits data using 400 ns Guard
interval (instead of 800 ns) to clients which also support Short GI;
STBC
– Soace-Time Block Coding method dedicated to improve data transmission reliability. The field is
available only if the selected mode of operation of the radio interface includes 802.11n. When checked,
the device transmits one data flow through several antennas. When unchecked, the device does not
transmit one data flow through several antennas.
Beacon Interval, ms
– beacon frames transmission period. The frames are sent to detect access points.
The parameter takes values from 20 to 2000 ms, by default – 100 ms;
Fragmentation Threshold
– frame fragmentation threshold, bytes. The parameter takes values 256-2346,
by default – 2346;
RTS Threshold
– after what quantity of bytes the Request to Send will be sent. Decreasing of the
parameter's value might improve access point operation when there are a lot of clients connected.
However, decreasing of the parameter's value will reduce general bandwidth of wireless network. The
parameter takes values from 0 to 2347, by default – 2347;
Aggregation
– enable support for AMPDU/AMSDU;
Short Preamble
– use of the packet short preamble;
Broadcast/Multicast Rate Limiting, p/s
– when the flag is set, transmission of broadcast / multicast
traffic over the wireless network is restricted. Specify the limit for broadcast traffic in the popup window
(p/s).
