Operating mode
Part 1: Operation
8
Operating mode
Control elements in operating mode
Home
button
: Switch between operation of the
controller and normal mode (standard display)
Rotary knob
: Search for a level, or
search for a set value/parameter, or
adjust the selected value
Press
F buttons
:
Select the adjacent level
Select the adjacent value
Select the adjacent function [text]
To change or query set values, an F button must first be
pressed in normal mode:
=> Change/display the selected value
or the Home button must be pressed:
=> Controller switches to Operation mode
Display in operating mode
End
01
Display
Main menu .
User
Time Programs
General operating procedure
Home button => operating mode
Use the rotary knob to find the area [type of values]
Use the F button to select the area
Use the rotary knob to search for the level
[generator/consumer]
Use the F button to select the level
Use the rotary knob to search for the set/display
value
Use the F button to select the set/display value
Use the rotary knob to change set value
Use the F button to select the function/confirm the
change.
Selectable functions with the F buttons
[End] Cancels the current function without saving
[Favorite] Transfers the set value to the favourite level
[Standard] Changes the set value to the factory setting
[OK] Cancels and saves the current function
[==>] Next set value (e.g. time: hour->minute)
[<==] Previous set value (e.g. date: month<-year)
End
Favorite
Standard
OK
T-Room desired 1 .
20,0 °C
When applying voltage, the level installation is
displayed once only. Once the values grouped here
have been set the controller is operable.
When the level appears later on, e.g. after a power
outage, the function can just be ended.
Areas [Type of set values]
Display
System value display (e.g. sensor values and setpoints).
No adjustments can be made. Incorrect operation is
therefore impossible in this area.
User
Settings that can be made by the operator.
Time program
Time programs for heating circuits, the hot water circuit
and extra functions where applicable
Time-Date
Time, date, holiday program and data for the
summer/winter changeover
Service
Values for the service technician
Expert
Values for which expert knowledge is required to make
settings (installation technician).
E
Values in the expert level are protected by a code no.
(damage/malfunction possible).
Expert HS (only for HS via BUS)
Summary/display of the values sent to the BUS by the
HS.
Levels [Assignment of the set values]
The settings in the different areas are sorted into
operating levels
Installation
All display values and settings that relate to the heat
generator or the entire system and cannot be assigned to
a consumer circuit.
Hot-Water
All display values and settings that affect central hot
water preparation and circulation.
Heatcircuit 1 / 2
All indicator and set values that relate to the
corresponding consumer circuit (also, for example, as
decentral hot-water circuit).
Solar / MF
All indicator and set values that relate to solar energy
recovery and settings for the multifunction relay.
!
An overview of all settings can be found on the
following pages.