Normal Mode
Part 1: Operation
6
Part 1: Operation
Part 1: Operation
Normal Mode
Mo 26. May 05 10:00
T-HS 1
56,8°C
(1)
Standby Heating
1
2
3
4
!
Due to the tolerances of sensors, deviations of
+/- 2K (2°C) are normal between various
temperature displays. Temperatures which change
rapidly can have higher deviations for short periods
due to the different time-related behaviour of
various sensors.
!
The indicator of the current heating programs of all
internal heating circuits of the controller is firmly
anchored in the favorite level line [2]. The
associated heating circuit is displayed in brackets.
You can program all other favorites yourself. The
rotary knob is used to change the display.
End
Party
Reduced
OK
Mode .
Standby
End
Party
Reduced
OK
Mode .
01 00
h min
Reduced
End
Party
Reduced
OK
Mode .
05 days
Reduced
For initial start-up or the "level Installation,"
please read the installation section.
Control elements in normal mode
Rotary knob
: Use the rotary knob to select a value
from the favourite level for display in line 2
Home
button
: Switch between operation of the
controller and normal mode (standard display)
F keys
=> See line functions
Display / line functions in normal mode
Line 1
: Displays Day, Date and Time
F button: Adjust Date, Time and Holiday
Line 2
: Displays Favorites (the selection of the currently
displayed favourites takes place with the rotary knob)
F button: Adjust Favorites or additional displays
Line 3
: Display the temperature of the heat generator 1
or the collector for cascades
F button: Display of the set temperature for the HS
Line 4
: Left => Display of the central operating mode
Right => Display of the current situation of the first
heating circuit – provided it is not remote controlled
(Heating, Reducing, Party or Holiday)
F button: Adjust or activate the mode, the Party,
Reducing or the Holiday function (valid for all internal
heating circuits)
!
In order to adjust the values from the standard
display, press the associated F button and adjust
using the rotary knob or, if there are several
values, first select the desired value with the F
button. Save the value using the F button [OK].
Setting the mode as well as the Party, Reducing and
the "Direct Holiday Function"
In normal mode (standard display), press the F button [4].
The rotary knob can now be used to change the
operating mode (see next page for the operating mode).
Save with "OK" => F button [4]
End without save with "End" => F button [1]
For the activation of the party or the reducing function,
press the corresponding F button [2 or 3].
The rotary knob can now be used to set the heating time
increase (Party) or the heating time interruption
(Reducing).
If the heating or reducing needs to take place for the rest
of the day, then you can turn the rotary knob to the left to
heat or interrupt the heating for entire days. In this
manner, a direct starting holiday program can be set very
quickly (e.g. Reduced 5 Days)