Elnec SEEprog, User Manual

Page: 13 / 171

Quick Start
Installing programmer hardware
•
connect the USB (or LPT) port of programmer to a USB (or printer) port of PC using
supplied cable
•
connect the connector of the power supply adapter to the programmer or turn on
programmer by switch
Installing the programmer software
Run the installation program from the CD (setup.exe) and follow the on-screen instructions.
Please, for latest information about the programmer hardware and software see
www.elnec.com .
Run the control program
Double click on
After start, control program PG4UW automatically scans all existing ports and searches for
any connected ELNEC programmer. Program PG4UW is common for all ELNEC
programmers hence PG4UW will try to find all supported programmers.
Menu
File is used for source files manipulation, settings and viewing directory, changes
drives, changes start and finish address of buffer for loading and saving files and loading and
saving projects.
Menu
Buffer is used for buffer manipulation, block operation, filling a part of buffer with string,
erasing, checksum and of course editing and viewing with other items (find and replace
string, printing...).
Menu
Device is used for a work with selected programmable device: select, read, blank
check, program, verify, erase and setting of programming process, serialization and
associated file control.
Menu
Programmer is used for work with programmer.
Menu
Options is used to view and change various default settings.
Menu
Help is used for view supported devices and programmers and information about
program version.
Programming a device
1. select device: click on
2. load data into buffer:
a) from file: click on
b) from device: insert device to ZIF and click on
3. insert target device to ZIF
13