Gold Bell Installation Guide
MAN-G-BELIG (Ver. 1.200)
|Connector J2 |
www.elmomc.com
7
Table of Contents
Chapter 3:
Product Description
The Gold Bell is an advanced high power density servo drive delivering up to
1.6 kW of continuous
power
or
3.2 kW of peak power
in a 49.4 cc (3.02 in
3
) package (55 x 59 x 15 mm or 2.17” x 2.32” x
0.6”). The Gold Bell is designed to be mounted on a PCB by soldering its pins directly to the PCB.
This advanced, high power density servo drive provides top performance, advanced networking and
built-in safety, as well as a fully featured motion controller and local intelligence. Power to the Gold
Bell is provided by a DC power source which is isolated from the Mains. The Gold Bell can operate
with single or dual power supplies. If separation between the main DC power source and a control
supply is required, then a control supply (isolated from the Mains) is required.
The drive can operate as a stand-alone device or as part of a multi-axis system in a distributed
configuration on a real-time network.
The Gold Bell drive is easily set up and tuned using the Elmo Application Studio (EASII) software
tools. As part of the Gold product line, it is fully programmable with the Elmo motion control
language. For more information about software tools refer to the Elmo Application Studio Software
Manual.
The Gold Bell is available in a variety of models. There are multiple power rating options, two
different communications options, a number of feedback options and different I/O configuration
possibilities.
3.1.1
Accessories
•
Cable Kit (TBD)