Gold Bell Installation Guide
MAN-G-BELIG (Ver. 1.200)
|Connector J2 |
www.elmomc.com
28
Table of Contents
9.5.4
Power Supply for power rating 100 V
9.5.4.1
Single Power Supply
Only one power supply is required for the main and control power.
*
It is strongly recommended to add a filter on the VL+ Input Pin at the Gold Bell, in order to avoid
interference from the power stage e.g. noises. The following figure describes the filter
recommended.
Figure 9: Single Power Supply Connection Diagram with VL+ Connected Internally to
Recommended Filter
Note:
Make sure to connect the PR to the closest earth connection near the power supply.
