Gold Bell Installation Guide
MAN-G-BELIG (Ver. 1.200)
|Connector J2 |
www.elmomc.com
33
Table of Contents
Pin (J2) Signal
Function
36
EtherCAT: PHY_OUT_TX-
EtherCAT Out transmit complement
CAN: Reserved
Reserved
37
PHY_IN_LINK_ACT
EtherCAT In active LED
38
EtherCAT: PHY_OUT_LINK_ACT
EtherCAT Out active LED
CAN: CAN_L
CAN_L BUS Line(dominant low)
39
PHY_IN_SPEED
EtherCAT In Speed LED
40
EtherCAT: PHY_OUT_SPEED
EtherCAT Out Speed LED
CAN: CAN_H
CAN_H BUS Line(dominant high)
41
USBD-
USB data complement
42
USBD+
USB data
43
COMRET
Common return
44
USB_VBUS
USB VBUS 5V
45
RS232_RX /SB_OUT
There are two options for this pin:
Option 1
:
RS232 receive (default)
Option 2
:
Serial Bus output for extended I/O
(refer to Chapter 13 of the MAN-G-Board Level
Modules Hardware Manual.)
46
COMRET
Common return
47
+5VE
E5 V supply
48
RS232_TX /SB_IN
There are two options for this pin:
Option 1
:
RS232 transmit (Default)
Option 2
:
Serial Bus IN for extended I/O (refer
to Chapter 13 of the MAN-G-Board Level Modules
Hardware Manual.)
Table 6: Connector J2 – Feedback and Analog Input
