Gold Bell Installation Guide
MAN-G-BELIG (Ver. 1.200)
|Connector J2 |
www.elmomc.com
17
Table of Contents
7.5
Power Conductors PCB layout
The PCB virtually divided into two zones; Power Zone, and Control & Communication Zone.
•
Power Zone
This area is dedicated to Power conductors only: VP+, PR, PE, VL+, VL-, VN- and motor leads.
•
Control and Communication Zone
This area of the PCB is dedicated to Control low level signals
Figure 3: Gold Bell Power Conductors PCB layout
For more details, refer to the section 5.4 in the MAN-G-Board Level Modules Hardware Manual.
