Gold Bell Installation Guide
MAN-G-BELIG (Ver. 1.200)
|Connector J2 |
www.elmomc.com
49
Table of Contents
9.7
Connector J1 - Digital I/O, Analog Inputs, LEDs,
and STO
For full details on Digital and Analog I/Os, see
Chapter 11 and 12 in the MAN-G-Board Level
Modules Hardware Manual.
For full details on the LEDs, see Chapter 7 Drive
Status Indicator, and section 14.2.6 EtherCAT
Status Indicator in the in the MAN-G-Board Level
Modules Hardware manual for full details.
For full details on STO, see Chapter 9 in the in the
MAN-G-Board Level Modules Hardware manual
for full details.
Connector Type: 1.27 mm pitch 0.41 mm sq
Pin (J1)
Signal
Function
1
SB_Load
Serial Bus Load for extended IO (refer to Chapter
13 of the MAN-G-Board Level Modules Hardware
manual)
2
SB_Clock
Serial Bus_Clock (9.375Mhz) for extended IO (refer
to Chapter 13 of the MAN-G-Board Level Modules
Hardware manual)
3
INRET1_6
Programmable digital inputs 1–6 return
4
IN1
Programmable digital input 1
5
IN2
Programmable digital input 2
6
IN3
Programmable digital input 3
7
IN4
Programmable digital input 4
8
IN5
Programmable digital input 5
9
IN6
Programmable digital input 6
10
STO_RET
STO signal return
11
STO2
Safety 2 input
12
STO1
Safety 1 input
13
LED_ETHERCAT ERR
LED Status EtherCAT ERR
14
LED_ETHERCAT RUN
LED Status EtherCAT RUN
15
OUT2
Programmable output 2
