Gold Bell Installation Guide
MAN-G-BELIG (Ver. 1.200)
|Connector J2 |
www.elmomc.com
30
Table of Contents
9.5.4.2
Shared Supply
A single DC Power Supply can supply the power for logic as well as the main power. If separation
between the main DC power source and a control supply is required, then a control supply (isolated
from the Mains) can be connected by implementing “diode coupling" (Figure 11).
Figure 11: Shared Optional Power Supply Connection Diagram
Note:
Make sure to connect the PR to the closest earth connection near the power supply.
