45
EN
RF Touch Unit Warnings
Warning is displayed in case of incorrect or incomplete entry.
Warning
Procedure
It is possible to defi ne a maximum 40 rooms.
In each group (temperature control, switching, dimming, blinds) the na-
mes of up to 40 rooms can be entered
The same room has already been included in this group.
Enter another name
Upload failed.
Repeat entry
Could not delete it.
Repeat entry
Full address must be entered.
Check and enter the correct address
Address is used.
Check and enter the correct address
In the room, the unit is already assigned. Choose another unit.
Only one actuator can be allocated to one name of device (outside
Quick Control)
There is not any unit in this room!
Assign the desired actuator
No assigned unit.
Assign the desired actuator
In the list of units the address is already occupied. Choose another
address.
Check and enter the correct address
Unit is already programmed with another.
To one heating circuit You can enter 10 actuators
It is possible to defi ne a maximum of 30 detectors.
The names of up to 30 detectors can be assigned to one group
In the room, the detector is already assigned. Choose another room.
Only one name can be assigned to one detector
In the list of detectors the address is already occupied.
Check and enter the correct address
Programming with unit failed.
Check the location of the detectors (see Detector instructions)
It is possible to program a maximum of 14 units.
No more than 14 rooms in Quick control
It is possible to defi ne a maximum of 20 units to one group fast control.
No more than 20 units can be entered in Fast control for one room