24
RFSA-11B
RFSAI-61B
RFUS-61
RFDAC-71B
RFSC-61
RFSA-6x
3
2
1
4
7
6
5
8
A
0
9
B
E
D
C
F
C
OK
RFSA-11B
RFSA-11B
RFSA-11B
Setting / Programming / Switching, Dimming, Blinds /
Assing new
In the required section (Switching, Dimming, Blinds) select Assign
new
(fig. 45)
. A list of selected sections actuators will be shown
(fig.
46)
. Select the name of the actuator which you want to associate
with the RF Touch. Enter the address of actuator you want to assign
−
fig. 47
as indicated on the actuator (see page 11). Confi rm with
OK
.
From the menu you created, select the name to which the actuator
will be assigned
(fig. 48)
. Confi rm selection −
fig. 49th
.
The menu is displayed
(fig. 50)
:
•
Remove
(fig. 55)
− serves to cancel the link between the temperature unit and the
name from the menu
Switching / Dimming / Blinds
.
•
Change of Address
(fig. 56)
− edit to change the addresses of assigned components.
•
Synchronization
(fig. 57)
− the synchronization of the state of the output component for
other system components connected within range of the RF
signal of the installation.
•
Communication test
(fig. 58)
− used to check the location of the element (range and signal
quality).
Setting / Programming / Switching, Dimming, Blinds /
Assigned reseivers
It serves to control or remove the actuator from the name of the
menu you created.
In the selected section (Switching, Dimming or Blinds) select
Assigned receivers
(fig. 51)
a list of names specifi ed in this section
will be shown
(fig. 52)
. Touching on the name you will assign it to
fig. 47
fig. 48
fig. 49
fig. 45
fig. 46
fig. 53
fig. 51
fig. 52
fig. 50
Switching
Assigned
receivers
Assing
new
Assign new
Insert address
room heater
Location
entrace light
room ventilator
room lamp
chandelier
hall light
room heater
Location
entrace light
room ventilator
room lamp
chandelier
hall light
Synchronization
Remove
Communication test
Change of Address
Switching
Assigned
receivers
Assing
new
room heater
Assigned
entrace light
room ventilator
room lamp
chandelier
hall light
Assigned
room heater
Location
entrace light
room ventilator
room lamp
chandelier
hall light