42
19:45
09:00
OK
19:45
09:00
OK
The time set for
Up / Down
can not be less than the measured time
“t” + 2s longer than 4 minutes. The adjusted time for
Up
and
Down
may vary.
A short touch on
Up
/
Down
can control the devices in the
desired direction. Touch longer than 3 devices place the desired end
position.
Setup
/
is the same as the Switching menu see page 37.
Note: Setting the Inversion function: touch
/
in the Weekly programme
to set the initial movement of the roll-up blinds
(fig. 167—168).
Main menu / Detectors
The menu
Detectors
is used for the visualisation and switching of
devices using detectors.
By touching the option
Detectors
(fig. 169)
you will display the list
of names on the detector menu that you have created
(fig. 170)
.
• Detectors RF
There is a graphic display of the detectors contact* (green − on,
red − off ). By touching the name of the detector you will display the
name of the switching actuator with which the detector is paired.
(fig. 170—171)
.
Note: The function of Delayed Switch Off is automatically allocated to the
detector. The time delay is set for the paired actuator.
• Detectors OASIS − Single State
(JA-80P − motion)
Detectors do not feature state visualization and they are designed
for pairing with the multifunctional switching actuator. By touching
the name of the detector you will display the name of the switching
actuator with which the detector is paired
(fig. 172—173)
.
Note: The function of Delayed Switch Off is automatically allocated to the
detector. The time delay is set for the paired actuator.
fig. 168
fig. 167
fig. 169
fig. 170
fig. 171
fig. 173
fig. 172
window kitchen
window kitchen
Main menu
Detectors
main entrance
terrace
entrace light
window room
shop
main entrance
garage
Temperature regulation
Quick control
Detectors
Blinds
Dimming
Switching
Detectors
terrace
terrace
window room
garage
main entrance
shop
exterior light
Weekly overview
Daily overview
Weekly overview
Daily overview
Mo
Tu
We
Th
Fr
Sa
Su
Mo
Tu
We
Th
Fr
Sa
Su