21
EN
Switch unit
for shutters
RFJA-12B/
230V
The switching unit for blinds has 2 output
channels used to control garage doors,
gates, blinds, awnings, etc.
Connection of switched load 2 x 8A (2 x
2.000 W).
Switch unit
for shutters
RFJA-12B/
24V DC
The switching unit for blinds has 2 output
channels used to control garage doors,
gates, blinds, awnings, etc.
Contactless quiet switching.
Switch unit
for shutters
RFJA-32B/
24V DC
The switching unit for blinds has 2 output
channels used to control garage doors,
gates, blinds, awnings, etc.
Contactless quiet switching.
Detectors OASIS
JA-81M/82M
JA-81M / 82M is designed to detect the
opening of doors, windows, etc.
JA-80P
JA-80P is designed to detect movement
inside buildings.
Wireless
twilight switch
RFSOU-1
The wireless twilight dimmer measures the
light intensity and based on a set value, it
sends the command to switch on the lights
or pull the blinds up or down.
Wireless
fl ood detector
RFSF-1B
BLOCK
Monitors areas (e.g. bathrooms, basements,
shafts or tanks) to provide fl ood warning.
The flood detector immediately sends
a signal to the RF Touch. Reacts instantaneous
to flooding, while flooding remains the
programmed switching component remains
closed until a button on the RFSF Prog-1B
is pressed.
RFSF-1B
Monitors areas (e.g. bathrooms, basements,
shafts or tanks) to provide fl ood warning. The
fl ood detector immediately sends a signal
to the RF Touch. The RF Touch responds
instantaneous to fl ooding and run-off .
x
internal sensor
xx
external sensor
* internal and external sensor
** RFSA-6x: single channel component - RFSA-61B, RFSA-61M; dual channel component RFSA-62B and six-channel component RFSA-66M.
NB.: RFSA-62B / RFSA-66M can be used for independent control of two / six appliances, lights, outlets... Each channel has its own
address and is programmed separately.
Blinds
Detectors