41
00:02
00:02
OK
EN
Main menu / Blinds
Blinds
menu is designed to control all shutters, blinds, awnings,
gates and garage doors that have a built-end switch.
Touch the
Blinds
(fig. 162)
to display selection of names you created
in menu
(fig. 163)
.
Note: Graphical display of device status (green − closed blinds, red – open
blinds) it is only for information and may be infl uenced by the amount of
information processed or combining multiple control RF Touch and RF Pilot
units.
Touch the desired description / name of the device to display features
(fig. 164)
:
•
Up
•
Down
•
Setting
(RFJA-32B/24VDC does not set the pass time –
fig. 165)
•
-
Weekly program
provides weekly settings for the automatic
mode.
•
-
Holiday mode
is used for temporary interruption of the weekly
program.
First you need to measure time
“t"
which your device needs to fully
open / close.
Touch
Up
icon
(fig. 166)
for more than 3 seconds to put device into
the end position. Then touch
Down
icon longer than 3 seconds
to retract indicate the device while in motion, measure time
“t”
−
a period during which the equipment is in motion.
Under
Setting
you touch on a time interval of hours (minutes) mark
‹
information you want to change. Arrows / set measured by
time
"t" + 2s
pulling into the fi eld and the same time and in the fi eld
of load
(fig. 166)
. Confi rm the time by pressing
OK
.
fig. 162
fig. 165
fig. 166
fig. 163
fig. 164
Main menu
Blinds
window kitchen
Temperature regulation
Switching
Dimming
Blinds
Detectors
Quick control
window room
window kitchen
Up
Down
Up
Down
min.: t + 2 s
max.: 4 min
Up
Down
Setting
window kitchen
window living room
markyza
window bedroom
window room
garage