11
RFSA-61B
577515
☺
☺
☺
☺
☺
RF
RP-
2
0
RF
T
o
u
c
h
EN
Name
Address
Brick wall
60—90 %
Wooden structures
with plasterboard
plates
80—95 %
Reinforced concrete
20—60 %
Metal sheets
0—10 %
Standard
glass
80—90 %
e. g.: RFSA-61B
e. g.: 577515
1. Placement of the RF Touch and RF units
Keep in mind that the radio signal range of RF installation
depends ON building construction, materials and placement of
all units.
2. Fill Installation Form
•
device name that you want to manage (to create a menu)
•
the names of units (for the correct classifi cation of the group,
for example: RFSA-61B)
•
addresses of units (to identify the actuator, for example: 577515)
Installation form can be found at the end of this manual.
Basic Steps for Successful Programming
Transmission of radio-frequency signals
through various materials
3. Set menus (create names)
Create a list of names of the controlled device in the Settings /
Menu (create name).
4. Programming
Programming of the RF units with RF Touch is carried out in the
Settings / Programming menu.