Elko RF Touch, Installation Manual, Page: 17 / 48

17
EN
Remove button can delete unit name.
Press the Remove icon (fig. 24) following menu appears, select
the section from which you want to remove the name (fig. 25) . Pick
the device you want to delete by touching it (fig. 26) .
Press to confi rm the selection (fig. 27) . Selected name will be
deleted from menu.
Setting / Menu
(create menu)
/ Remove
Setting / Programming
Programming
is used to
assign
or
remove
the actuators / detectors
detectors to or from the
menu you created
.
• Only one name can be assigned for each actuator.
• When programming, actuator must be connected with the
installation.
Temperature components and detectors can be paired with the
multifunction switch.
Actuators are divided into sections for which they are intended.
According to the actuator's type you have to select appropriate
section − see table (eg programming actuator RFSTI-11B − fi nd it in
the Temperature regulation section).
fig. 26 fig. 24 fig. 25
fig. 29
fig. 27
fig. 28
Menu
Remove
Add
Edit
Remove
Blinds
Dimming
Switching
Detectors
Quick control
Temperature regulation
Remove
room 2 heater
room 1 heater
room heating
room heater
kitchen heating
bedroom heating
Remove
Do you really
want to remove?
room 2 heater
YES NO
Holiday mode
Menu (create menu)
Date and time
Setting
Programming
Display
Language
Programming
Blinds
Dimming
Switching
Detectors
Quick control
Temperature regulation