Eliet GZC 1000, Manual

Page: 20 / 92

20
English
7.3.7 Periodic maintenance
For your information:
For your own safety and in the interest of preserving the life of the machine, this
machine should undergo regular maintenance.
• Periodic maintenance is essential. Strictly follow the maintenance schedule in this operating
manual (see §11.2).
• The maintenance meter helps you to monitor the number of operating hours .
• Inspect the machine prior to every job. (Read § 9.1 and §11.4.1). Any defects must be repaired
immediately.
• Always make sure the motor is switched off before performing repairs or maintenance. Always
wait until all moving parts have come to a full stop before performing any action whatsoever.
• If parts must be replaced as a result of wear or failure, you must always turn to your author-
ised ELIET dealer for original replacement parts. This is of key importance for your own safety.
Warning:
Repairs, maintenance and cleaning must only be performed with the engine
disengaged and the spark plug cap decoupled.
7.3.8 Limits of the machine
• The work depth of the vibrating harrows can be adjusted from +10 mm to -40 mm (the lower
part of the rollers being the point of reference). The real work depth will be lower because the
machine will sink into the soil somewhat.
For your information :
The work depth depends on the surface and on the wear of the teeth.
• The combined lawn seeder should not be used at low temperatures or under frosty
circumstances.
• Do not use the machine on dried-out soil.
• The machine weighs (*) 385 kg (GZC750) / 415 kg (GZC1000). Please take this into account
when transporting the machine as well as when loading or unloading.
• The width of any passage should measure at least: 820 mm (GZC750) / 1140 mm (GZC1000).
• The tread width of the hind roller is: 710 mm (GZC750) / 1030 mm (GZC1000).
• The maximum ground clearance in transport mode is 10 mm (with the vibrating harrows in the