Eliet GZC 1000, Manual

Page: 29 / 92

29
English
Via a cable it controls a hinged handle on the bottom of the seed reservoir. By lifting the handle,
the slide is opened to the desired adjustable stop.
The slide stop can be set by using the lockable handle located on the upper side of the seed
reservoir.
Setting procedure:
• Loosen the castle nut. (1).
• Place the handle in the desired position. (2),
• Re-tighten the castle nut.
Placing the handle in a particular position determines the
setting of the slide stop.
Tip:
Holes are provided in the handle as reference points.
1. The motor must be turned off prior to refilling the seed reservoir.
2. Three things must be checked before refilling the seed reservoir:
o Verify that the scatter openings under the seed reservoir are not blocked and free of
condensation. Moisture would cause the seed to stick, resulting in blockage of the seed
openings.
o Check that the slide of the seed reservoir closes properly when the operating handle
‘opening/closing seed reservoir’ is in a closed position. This is to prevent grass from being
sown when you do not want it to be whilst the machine is being transported.
o Check the sides of the seed reservoir for condensation.
3. The seed must be sieved when refilling the seed reservoir so as to remove any foreign objects
(small stones, sticks, grass clippings) that could otherwise prevent proper closing of the seed
openings.
lockable handle
slide
aperture
drum
hinged handlel