Eliet GZC 1000, Manual

Page: 15 / 92

15
English
7.3 Safety instructions
7.3.1 General safety instructions
• The Owner Manual must stay with the unit during its complete service life. It serves as a refer-
ence for the user, and enables the machine to be used and maintained in accordance with the
correct instructions. Always refer to this instruction manual if you have any doubts about an
action that you are about to perform.
• Always observe the applicable regulations of the Labour Inspectorate to avoid accidents.
• If the instructions stated in this manual are not clear to you, do not hesitate to contact your
Eliet dealer for further explanation. The help desk at NV ELIET is at your service to answer all
of your questions. (EU +32 56 77 70 88 - USA 412 367 5185 ). (service@eliet.be)
• Under no conditions whatsoever may the original design of the machine be modified without
explicit and written consent of ELIET NV.
• Always observe all safety instructions when using this ELIET machine ! Carefully read all the
instructions relating to the operation of the machine. They are important for your own per-
sonal safety.
• Be sure to read the chapter which is intended for the dealer (see § 8. Dealer’s duties) and
verify whether the machine was delivered in accordance with the instructions.
• Get advice from the dealer or another professional when purchasing the machine
For your information:
Also read the safety instructions in the HONDA engine manual. It contains useful
tips about proper use and maintenance of the engine.
• Read and observe all safety messages stickered onto the machine (read § 7.1 for information
about the locations of the stickers)
7.3.2 Careful and proper use
• The purpose of the machine is to level the surface and seeding a new lawn. The machine
combines four separate operations:
Crumbling :
• Shattering clods
• Flattening the roughly prepared surface
Levelling:
• Irregularities are being removed
• The vibrating harrows loosen the structure of the top layer and distribute the soil evenly over
the work width. Foreign objects (stones, sticks, metal wire or other debris) that might surface
can be removed manually by the operator.