Eliet GZC 1000 Manual Download Page 67

Page: 67 / 92

English

Drive

1. Hinges belt tensioner hydrostatic drive
2. Hinges belt tensioners drive vibrating harrows

Lubricating hinges:

• To reach the points indicated, some protective covers and shields will have to be removed.

(Read § 15.1 if necessary.)

• To avoid wear and subsequent play on hinges, lubricant must be applied to the contact

surfaces that undergo friction.

• It is essential to remove all old dirty lubricant and sticking dust before applying fresh lubricant.
• Where possible, the hinging parts must be disassembled for proper cleaning of all elements

within.

• To dissolve lubricant, ELIET recommends the use of ELIET NOVATIO KLEENSPRAY-S. Spray the

product onto the hinging parts. Leave the product for a few minutes to enable it to perform its
degreasing action.

• Wipe the parts clean. Repeat the procedure if necessary to ensure that the parts are

completely clean.

• Make sure that all of the cleaning agent is either evaporated or wiped away.

Caution:

NOVATIO KLEENSPRAY-S is flammable. Avoid open fire or heat when applying it.

Summary of Contents for GZC 1000





























































































Search results

Summary of Contents for GZC 1000

Reviews:

Related manuals for GZC 1000

Brands by name

Popular brands

Eliet GZC 1000, Manual

Search results

Summary of Contents for GZC 1000

Reviews:

Related manuals for GZC 1000

Brands by name

Popular brands