Eliet GZC 1000, Manual

Page: 53 / 92

53
English
• If only two ramps are used, they must each have a width of at least 30 cm. The ramps put
against each other for support of the central swivel caster provides a tread that corresponds
to the width of the rollers.
.
• Use a non-slip ramp for loading the machine into a van or onto a trailer.
• Ensure that the ramps are properly hitched onto the vehicle or trailer. Ensure that the traction
cannot detach the ramps.
• The machine weighs over 385kg (GZC750) or 415 kg (GZC1000), make sure that the ramps
have the bearing power to carry both the machine and the operator.
• The machine can also be loaded onto a trailer with the use of a crane. A special lifting point
was provided for this purpose.
• If loading the machine onto a utility trailer, the trailer itself should be hitched onto a vehicle.
• Under no circumstances should the angle of the incline exceed 25°.