24
English
9. Operating instructions
9.1 Preliminary checks
Caution:
Before starting the work, it is recommended to get into the habit of checking the
following points:
Checklist
A. Perform a visual inspection of the condition of the machine (read § 11.4.1 Visual check).
B. Check the oil level. Pull out the dipstick and check that the oil level is not below the minimum
mark (If necessary, read § 11.3.3 Checking the oil level of the engine).
C. Check that there is sufficient oil in the reduction gearbox of the vibrating harrows. Remove
the cover on the casing to this effect. (If necessary, read § 11.4.13 Checking the oil level in the
reduction gearbox).
D. Check the oil level of the hydrostat. (If necessary, read § 11.4.11 Checking the hydrostat level).
C. Check that the fuel tank contains enough fuel (tank content 5.3 litres). If not, the machine
must be refuelled (Read § Refuelling).
D. Check that the air filter is not heavily soiled (if necessary, read § 11.3.1 Cleaning the air filter).
E. Check that all safety provisions on the machine still function (see § 7.2 Safety features).
After verification and approval of all points on the checklist, the work area can be prepared
(read § 9.3 Preparing the work area) and the machine wheeled to it.
9.2 Characteristics of the work area
To avoid damaging the machine and to guarantee a quality result of your efforts, the terrain
operated on must meet a few conditions:
Summary of Contents for GZC 1000
Page 1: ...GZC 750 GZC 1000 M A N U A L...
Page 86: ...86 English...
Page 91: ...91 English...
Page 92: ......
