Eliet GZC 1000, Manual

Page: 45 / 92

45
English
Placement
Reverse the order of actions involved in removal of the seed reservoir to place it on the machine.
Take the following points into consideration:
• Check that the handle for (dis)engaging the drive of the drum is in its far-most, disengaged
position (position 0).
• Be very careful when lowering the seed reservoir into the machine to avoid damage to the
seed reservoir or the machine.
• Once the seed reservoir is in the machine, check that the openings of both couplings (1) are in
the correct position relative to each other before operating the (dis)engaging handle. If they
are not positioned correctly, the synthetic couplings may get damaged.
• The position of the couplings can be corrected by manually turning the rotating drum in the
seed reservoir.
9.8 Cleaning the machine
Warning:
Repairs, maintenance and cleaning must only be performed with the engine
disengaged and the spark plug cap decoupled.
Warning:
Always wear safety gloves when checking defects or performing maintenance to
the machine.
Failure to clean the machine will induce quicker wear. A machine functioning suboptimally can
compromise the operator’s safety.