Elettronica Santerno SINUS/ISD 200 S-0.75, User Manual, Page: 61 / 206

SINUS/ISD 15P0082B8
USER MANUAL
6 - 5/82
6.4 6.4 FUNCTION BLOCK DESCRIPTIONS FUNCTION BLOCK DESCRIPTIONS
The following function block descriptions are arranged in alphabetical order. They each appear as a Menu in the
FUNCTION BLOCKS menu at level 2, in the Programmer menu system.
Note:
Remember to select the correct mode, Parameterisation or Configuration, whilst editing. Refer back to
“ Modifying a Block Diagram”, page 6-1/82. You must select the Advanced view level to see the
FUNCTION BLOCKS menu at level 2, to do this go to MENUS menu at level 1.
6.4.1 Contents List
Function Block Function Block Page Page Function Block Function Block Page Page
ANALOG DIGIN 6-6/82 OPERATOR MENU 6-42/82
ANALOG INPUT 6-8/82 OP STATION 6-43/82
ANALOG OUTPUT 6-10/82 PASSWORD 6-45/82
AUTO RESTART 6-12/82 PATTERN GEN 6-46/82
AUTOTUNE 6-14/82 PID 6-47/82
BRAKE CONTROL 6-15/82 PRESET 6-49/82
COMMS CONTROL 6-16/82 RAISE/LOWER 6-51/82
CURRENT FEEDBACK 6-17/82 REFERENCE 6-52/82
CURRENT LIMIT 6-19/82 SEQUENCING LOGIC 6-54/82
CUSTOM SCREEN 6-20/82 SETPOINT SCALE 6-56/82
DEMULTIPLEXER 6-22/82 SKIP FREQUENCIES 6-57/82
DIGITAL INPUT 6-23/82 SLEW RATE LIMIT 6-59/82
DIGITAL OUTPUT 6-24/82 SLIP COMP 6-60/82
DYNAMIC BRAKING 6-25/82 STABILISATION 6-61/82
ENCODER 6-26/82 STALL TRIP 6-62/82
FLUXING 6-27/82 STOP 6-63/82
FLYCATCHING 6-29/82 SYSTEM PORT (P3) 6-64/82
I/O TRIPS 6-31/82 SYSTEM RAMP 6-65/82
I*t TRIP 6-32/82 TEC OPTION 6-67/82
INJ BRAKING 6-33/82 TRIPS HISTORY 6-68/82
JOG 6-34/82 TRIPS STATUS 6-69/82
LOCAL CONTROL 6-35/82 UNDERLAP COMP 6-71/82
LOGIC FUNCTION 6-36/82 VALUE FUNCTIONS 6-72/82
MINIMUM SPEED 6-40/82 VECTOR FLUXING 6-79/82
MULTIPLEXER 6-41/82 VOLTAGE CONTROL 6-80/82
ZERO SPEED 6-81/82