Elettronica Santerno SINUS/ISD 200 S-0.75, User Manual, Page: 173 / 206

SINUS/ISD 15P0082B8
USER MANUAL
12 - 1/8
12.0 12.0 C C
ERTIFICATION FOR THE ERTIFICATION FOR THE
II
NVERTER NVERTER
12.1 12.1 EUROPEAN DIRECTIVES AND THE CE MARK EUROPEAN DIRECTIVES AND THE CE MARK
The following information is supplied to provide a basic understanding of the Electro Magnetic Compatibility
(EMC) and Low Voltage Directive (LVD) CE marking requirements. The following literature is recommended for
further information:
•
Recommendations for Application of Power Drive Systems (PDS), European Council Directives - CE
Marking and Technical Standardisation -
(CEMEP)
Available from your local trade association.
•
Guide to the use of Elettronica Santerno products in compliance with the EMC standars.
Available from Elettronica Santerno, part number 15N0020B1.
The European machines and drives manufacturers via their national trade associations have formed the
European Committee of Manufacturers of Electrical Machines and Power Electronics (CEMEP).
Elettronica Santerno and other major European drives manufacturers are working to the CEMEP
recommendations on CE marking.
The CE mark shows that a product complies with the relevant EU directives, in our case the LVD and, in some
instances, the EMC Directive.
12.1.1 CE MARKING FOR LOW VOLTAGE DIRECTIVE
When installed in accordance with this manual, the Inverter is CE marked by Elettronica Santerno in accordance
with the low voltage directive. An EC Declaration of Conformity (low voltage directive) is included at the end of
this chapter.
12.1.2 CE MARKING FOR EMC - WHO IS RESPONSIBLE?
Note: The specified EMC emission and immunity performance of this unit can only be achieved when the unit
is installed to the EMC Installation Instructions given in this manual.
1. 1. Where the supplied unit has an intrinsic/direct function to the end user, then the unit is classed as Relevant Relevant
Apparatus Apparatus .
2. 2. Where the supplied unit is incorporated into a higher system/apparatus or machine which includes (at least)
the motor, cable and a driven load but is unable to function without this unit, then the unit is classed as a
Component Component.
■
Relevant Apparatus Relevant Apparatus – Elettronica Santerno Responsibility – Elettronica Santerno Responsibility
Occasionally, say in a case where an existing fixed speed motor - such as a fan or pump - is converted to
variable speed with an add-on drive module
(Relevant Apparatu s), it becomes the responsibility of Elettronica
Santerno to apply the CE mark and issue an EC Declaration of Conformity for the EMC Directive. This
declaration and the CE mark is included at the end of this chapter.
■
Component Component - Customer Responsibility - Customer Responsibility
The majority of Elettronica Santerno’s products are classed as Components and therefore we cannot apply the
CE mark or produce an EC Declaration of Conformity in respect of EMC. It is therefore the
manufacturer/supplier/installer of the higher system/apparatus or machine who must conform to the EMC
directive and CE mark.