Elettronica Santerno SINUS/ISD 200 S-0.75, User Manual, Page: 125 / 206

SINUS/ISD 15P0082B8
USER MANUAL
6 - 69/82
6.4.1.46 TRIPS STATUS
The inverter supports advanced and
flexible trip logic to support monitoring
of the inverter itself, the motor and the
load. This function block provides a
view into the current trip condition(s)
and allows some trips to be disabled. MMI Menu Map
1
SETUP PARAMETERS
2
FUNCTION BLOCKS
3
TRIPS
4
TRIPS STATUS
DISABLED TRIPS
ACTIVE TRIPS
TRIP WARNINGS
FIRST TRIP
TRIPS STATUS TRIPS STATUS
ACTIVE TRIPS [ 4] –– 0000
WARNINGS [ 5] –– 0000
FIRST TRIP [ 6] –– NO TRIP
0600 – [231] DISABLED TRIPS ––
Parameter Descriptions Parameter Descriptions
DISABLED TRIPS DISABLED TRIPS Range: 0000 to FFFF
Indicates which trips have been disabled. Not all trips may be disabled, the DISABLED
TRIPS mask is ignored for trips that cannot be disabled. See below for which trips may
be disabled and how this parameter is formed.
ACTIVE TRIPS
ACTIVE TRIPS Range: 0000 to FFFF
Indicates which trips are currently active. This parameter is a coded representation of
the trip status. See below for a description of how this parameter is formed.
WARNINGS
WARNINGS Range: 0000 to FFFF
Indicates which conditions are likely to cause a trip. This parameter is a coded
representation of the warning status. See below for a description of how this parameter
is formed.
FIRST TRIP
FIRST TRIP
Range: Enumerated - see below
From when a trip occurs until that trip is reset, this parameter indicates the trip source.
When several trips have occurred, this parameter indicates the first one that was
detected.
Enumerated Value : First Trip
0 : NO TRIP
1 : LINK OVERVOLTS
2 : LINK UNDERVOLT
3 : OVERCURRENT
4 : HEATSINK TEMP
5 : EXTERNAL TRIP
6 : INPUT 1 BREAK
7 : INPUT 2 BREAK
8 : MOTOR STALLED
9 : I*T TRIP
10 : BRAKE RESISTOR
11 : BRAKE SWITCH
12 : OP STATION
13 : LOST COMMS
or or
MMI Menu Map MMI Menu Map
1 1 TRIPS STATUS
DISABLED TRIPS
ACTIVE TRIPS
TRIP WARNINGS
FIRST TRIP