32
Removing and replacing components
T
O
REMOVE
THE
HDD
C
AUTION
:
Before you touch any parts inside the print engine, make sure that you wear an
ESD grounding wrist strap and follow all ESD safety precautions.
1.
Remove the Fiery X3eTY from the print engine, (see page 10).
2.
Before you lift the pan lid all the way off the Fiery X3eTY, disconnect the SATA power
cable and the HDD cable from the HDD.
N
OTE
:
Do not stretch the cables as you lift the lid.
3.
Remove the four HDD screws from the outside of the pan lid. Lift out the HDD.
Hold the HDD as you remove the last screw. Set the screws aside so that you can replace
them later.
4.
Place the HDD in an antistatic bag.
Do not touch the drive with magnetic objects, such as a magnetic screwdrivers. Do not
place items near the HDD that are sensitive to magnets, such as credit cards and
employee ID cards (see “Proper handling” on page 31).
HDD
Power supply
SATA1
connector
