EFI E-45 Installation And Service Manual Download Page 99 | Manualshive

Page: 99 / 126

EFI E-45 Installation And Service Manual Download Page 99

99

Installation and Service Guide: Color Controller E-45

Installing System Software

5

Click

Open

.

Installing system software

Install both system software DVDs when you replace a hard disk drive or upgrade to the latest version of the E-45
software. You can install software from the following disks:

•

System Software DVD 1— Fiery System Software for the E-45.

•

System Software DVD 2 and 3—Windows operating system.

•

User Software DVD 4—Fiery User Software for installation on the E-45 and client computers.

To install and verify the system software installation

Follow these instructions to complete the system software installation:

•

“Before you install or upgrade system and user software”

•

“Installing or upgrading the system and user software with Fiery System Installer”

•

“After installing or updating the system software”

•

“Verify the E-45 operation”

•

“Before you leave the customer site”

Before you install or upgrade system and user software

1

Before you proceed, do the following:

•

Ask the site administrator to

•

Print the Job Log, Server Configuration page, and Font List, if possible.

•

If any options are activated on the server, you must deactivate them prior to reinstalling.

•

Archive and export to an external hard drive, USB storage device or network folder any customer-installed fonts
and FreeForm masters, if possible.

•

Save and export to an external hard drive USB storage device or network folder any custom simulation profiles
and custom spot color settings, if possible.

2

If you are installing system software, back up the system configuration (if possible).

For more information, see

Installing or upgrading the system and user software with Fiery System Installer

You can use the E-45 or Fiery QuickTouch to use Fiery System Installer. You can also use a monitor, mouse, and keyboard
attached if available.

Important:

Remove all dongles and devices, on the E-45 except the keyboard and mouse. If you do not remove

dongles or devices, the system software installation may fail.

«
...
97
98
99
100
101
...
»

Summary of Contents for E-45































































































































Reviews:

No comments