42
Installation and Service Guide: Color Controller E-45
Using the E-45
2
Press the power button (
)on the side of the Fiery QuickTouch panel.
3
Check the light on the Fiery QuickTouch.
The power supply automatically senses the correct voltage. Allow startup to proceed without interruption. Do not press
any buttons on the Fiery QuickTouch while the system is starting.
To shut down, restart, or reboot from the monitor
Note:
The Fiery NX Station (including monitor) is optional.
1
Make sure that the E-45 is not receiving, processing, or printing any files.
If the system just finished processing, wait at least five seconds after the system reaches Idle before you proceed.
2
Close all applications except Fiery Ticker.
3
Do one of the following:
•
Click the Windows Start button and select
Shut Down
.
•
Click the Windows Start button, click the arrow next to
Shut Down
, and select
Restart
.
•
Click “>>” icon at the upper-left corner of the screen, and select
Server Actions
>
Restart Fiery
or
Reboot Fiery
. Click
OK
.
4
If you shut down the E-45, move the E-45 power switch to the off (O) position for maximum energy savings or service
(wait 10 seconds before you proceed).