41
Installation and Service Guide: Color Controller E-45
Using the E-45
Table 1:
Network link indicators
Table 2:
Network speed indicators
Starting, shutting down, restarting, and rebooting
The customer will generally leave the E-45 on all of the time. Remember that when the E-45 is powered off, network
access to the printer is interrupted. Power off the E-45 when you need to service it and before you remove or attach any
cables to it.
To start the E-45
1
Make sure that the power cable is attached and that the power switch is in the ON position (|).
LINK/ACTIVITY LED
Network link status
Off
No link to network
Solid green
Valid link to network
Flashing green
Data transfer is in progress
SPEED LED
Network speed
Off
10 Megabits/second
Solid green
100 Megabits/second
Flashing green
1000 Megabits/second
Important:
Unless instructed otherwise by a troubleshooting procedure, always shut down the E-45 from the Fiery
QuickTouch monitor or from the monitor attached to the E-45. Do not use the power button on the side to shut down
the E-45.