91
Installation and Service Guide: Color Controller E-45
Performing Backup and Restore
Using Fiery System Restore
Fiery System Restore allows you to create a backup of the E-45 for quick recovery later when any problem happens. You
can restore the E-45 either from images stored on the local hard disk, or from a bootable USB drive. Fiery System Restore
also provides the feature of creating the scheduled backups.
You must log in to the E-45 as a system administrator to use the Fiery System Restore features.
You can access the Fiery System Restore from the WebTools
Home
tab, or from Fiery QuickTouch.
To access Fiery System Restore on Fiery QuickTouch
1
On Fiery QuickTouch, tap the
Quick launch
icon on the bottom-left corner of the screen.
2
Tap the
Fiery System Restore
icon and log in as a system administrator.
3
Follow the on-screen menus to schedule automatic backups, manually back up the E-45, or restore the E-45.
To access the Fiery System Restore from Command WorkStation
1
Start Command WorkStation and login to the E-45 with Administrator privileges.
The default Administrator password is
Fiery.1
(case-sensitive), but the site administrator may have changed the
password.
2
From
Server
menu, select
Device Center
.
3
Click
Tools
on the left side, and then click
Fiery System Restore
.
The Fiery System Restore will be displayed on a default web browser window.
To access the Fiery System Restore features on WebTools
1
From a client computer, start a web browser and enter the IP address or the DNS name of the E-45.
2
Select
Home
tab.
The available features are listed under
Fiery System Restore
section.
You must log in to the system as a system administrator before performing any of the backup/restore process.
Note:
The following tasks describe using Fiery System Restore on WebTools. Fiery QuickTouch uses the same menu
selections and features for backing up and restoring the E-45. Refer to the following tasks if you are using Fiery System
Restore on Fiery QuickTouch.
To setup automatic scheduled backup
1
In the WebTools
Home
tab, select
Schedule Automatic Backup
.
2
Select
Enable automatic backup
, and select when you want to start the backup process on the E-45.
Note:
The backup process takes more than an hour to complete and it requires the E-45 to be Idle status. If the E-45 is
not in Idle status, the backup process does not start.
3
Click
Save
.