EFI E-45, Installation And Service Manual, Page: 101 / 126

101 Installation and Service Guide: Color Controller E-45
Installing System Software
12
Wait for the Command WorkStation to start.
During the installation, a localhost connection to Command Workstation is created so when you start the E-45,
Command WorkStation starts also.
13
(Optional) Install and activate Fiery Impose.
For more information, see the installation document that accompanies the Fiery Impose kit (Installing the Fiery
Option).
14
(Optional) Install and activate Fiery Compose.
15
Shut down the E-45 (see page 41 ).
After installing or updating the system software
1
Restore the dongles and devices that you removed in a previous step.
2
Start the E-45 (see page 41 ).
3
Install any required software patches by System Updates (see page 102 ).
4
(Optional) Reinstall and reactivate Color Profiler Suite software on the E-45:
Use the Color Profiler Suite CD to reinstall the software on the E-45. For complete instructions, see the documentation
that accompanies the Color Profiler Suite kit.
5
(Optional) Reinstall and reactivate Fiery Impose and/or Compose on the E-45.
6
(Optional) Set up the proxy configuration if you have a proxy server.
In Configure, click
Fiery Server
>
System Updates
>
HTTP Proxy Settings
, and enter the proxy server information.
Save your changes and reboot the E-45.
You can also enter the proxy server information in System Updates application if a monitor, mouse, and keyboard are
attached to the E-45.
For more information on setting up proxy configuration, see Configuration and Setup , which is part of the user
documentation.
Verify the E-45 operation
1
Print the Test Page and the Server Configuration page.
If the Test Page does not print, verify that the printer interface cables are securely connected and on the correct ports,
and verify that the printer interface board is securely connected to the motherboard.
If image quality is poor, test the printer (see the service documentation that accompanies the printer).
2
Verify that the E-45 is connected to the network (see page 40 ).
3
Ask the site administrator to download a test job over the network.
If the job does not print or has poor image quality, see the Troubleshooting topics in Configuration and Setup , which is
part of the user documentation.