40
Installation and Service Guide: Color Controller E-45
Using the E-45
5
Touch Printable Info and then select the page that you want to print.
The E-45 sends the selected page(s) to the printer.
6
If you printed the Test Page, examine the quality of the page.
If the Test Page prints, you know the E-45 is functional and the connection between the E-45 and the printer is working.
If the Test Page fails to print, look up printing problems in the Troubleshooting table on
.
When you examine the Test Page, keep in mind the following:
•
All color patches should be visible, even though they may be very faint in the 5% and 2% range.
•
Each color’s patch set should show uniform gradation from patch to patch as the color lightens from 100% to 0%.
Poor image or color quality may indicate a need to calibrate the system or service the printer. Information on the Test
Page includes the date and time of the last calibration, so the Test Page can be kept for future reference. For more
information, look up printing problems on
, or see
Color Printing
from the user documentation set.
Using the Fiery desktop on the printer touch panel
You can access the E-45 desktop from the printer touch panel.
To access the E-45 desktop from the printer touch panel
1
At the printer touch panel, press the Fiery icon.
2
Login to the E-45 desktop as Administrator user.
The default password for the Administrator is
Fiery.1
(case-sensitive).
Network status LEDs
Two LEDs next to the network connector indicate the network link status and speed. For additional information about
network setup, see
Configuration Guide
, which is part of the user documentation set.
Figure 18:
Ethernet network port (upper RJ-45)
1
LINK/ACTIVITY
2
SPEED
1
2