![Edwards iXM Series Instruction Manual Download Page 79](http://html1.mh-extra.com/html/edwards/ixm-series/ixm-series_instruction-manual_2366129079.webp)
8.2 Alarms
The pump controller gives an alarm when a serious problem occurs.
The reason for the alarm selects if, the whole system or just the booster (if installed) will
shut down. Refer to
Unplanned shut down and alarms
on page 80 for more information on alarms.
If the system has shut down because of an alarm, correct the problem before you re-
start the pump.
When the problem that caused the alarm has been corrected, the alarm is cleared by
the pump controller.
8.2.1 LED alarm indicators
Alarms are indicated on the LEDs on the front control panel, the rear panel and on the
PDT if installed.
The alarm LEDs on the front control panel and rear panel illuminate continuously when
an alarm is given.
If a PDT is installed, the alarm LED flashes to indicate a new alarm. Refer to
on page 68 for more information on how alarms are indicated and how they
can be acknowledged through the PDT.
when all the alarms are cleared, the alarm LEDs extinguish.
8.2.2 PDT alarms
If a PDT is installed, each alarm causes an alarm message to be displayed. Refer to
Warning and alarm display and acknowledgement
on page 51 for more information on
how alarms are handled by the PDT.
lists the alarm messages that can be displayed on the PDT with possible
causes and actions which should be taken.
Table 34
Alarms
Warning message on PDT
Action message on PDT
on page 77
Reset EMS
on page 77
Contact us
on page 77
Exhaust Blocked
Service Pump
Alarm 54.12 - MB Mtr Temp High
on page 77
Check Cooling
on page 77
Check Cooling
Alarm 57.12 - DP Mtr Temp High
on page 78
Check Cooling
on page 78
Check Cooling
Alarm 70.12 - DP E/C Temp High
on page 78
Check Cooling
on page 78
Check Exh Pipe Temperature
on page 78
Check MB Rotor
Alarm 176.01 - MB zzzzzzzzzzzzz
on page 78
ffff xxxx yyyy
Diag aaaa bbbb
10/2020 - ©Edwards Limited
Page 76
M56635880_D
M56635880_D - Fault finding
Summary of Contents for iXM Series
