Edwards iXM Series, Instruction Manual

Page: 14 / 104

Figure 2 Controls/connectors on the rear of the system
1. Ethernet Local Area Network (LAN) LED
(green)
2. Ethernet link LED (yellow)
3. Ethernet connection
4. Power LED (green) 5. System interface connection
6. Warning LED (yellow) 7. Running and alarm LEDs (2 colours,
either green or red)
8. USB connection 9. Accessory interface connection
10. MicroTIM in control LED (green) 11. Micro TIM connection (if installed)
12. EMS interface 13. N
2
purge adjuster
14. Nitrogen purge connection 15. Exhaust gas outlet
16. RF earth (ground) stud 17. Cooling water supply connection
18. Cooling water supply return 19. Electrical supply connection
20. Electrical connector locking mechanism 21. Protective earth (ground) stud
1. Ethernet Local Area Network (LAN) LED
(green)
2. Ethernet link LED (yellow)
3. Ethernet connection
4. Power LED (green) 5. System interface connection
6. Warning LED (yellow) 7. Running and alarm LEDs (2 colours,
either green or red)
8. USB connection 9. Accessory interface connection
10. MicroTIM in control LED (green) 11. Micro TIM connection (if installed)
12. EMS interface 13. N
2
purge adjuster
14. Nitrogen purge connection 15. Exhaust gas outlet
16. RF earth (ground) stud 17. Cooling water supply connection
18. Cooling water supply return 19. Electrical supply connection
20. Electrical connector locking mechanism 21. Protective earth (ground) stud
2.2 Applications
The iXM pumping system is intended for use on applications as shown in Figure:
Applications .
The pump warranty will be invalid if the system is used on any other application. Contact
your supplier if you are in doubt, for advice on the suitability of the system for any
particular application.
10/2020 - ©Edwards Limited Page 11 M56635880_D
M56635880_D - General description