8-70
6205s2 BATHYMETRIC AND SIDE SCAN SONAR
0025262_REV_A
3.
Under [Serial5], set Create = 3 and remove the semicolon from the beginning of each line in the
[Serial5] section.
4.
When the command Parserparameters=HEAVESCALE -1.0 is present in the [Serial5] section, add
or ensure a semicolon at the beginning of the line to disable the command. When the command
is not present, leave as is as the command is not required
Figure 8-25: POSMV UDP Configuration
CAUTION!
Do not alter the file other than what has been specified.
This will deactivate COM ports 1, 2, and 3 while activating COM 5, which has been pre-configured for
POSMV functionality. Therefore, Discover will not throw up any errors if a sensor is not connected to
COM1, COM2, or COM3.
To review the time synchronization sources:
1.
Locate and open the SonarConfig.ini file. This file is located in the same directory as the
SonarSerial.ini file modified above.
Summary of Contents for 6205S2
