background image

 

 

 

   

PROBLEM?   

 

 

 

 

 

5

  

Do not HESITATE to call us via our assistance hotline (at the end of the notice). Our technicians will have the pleasure to 

help you make a perfect installation.

 

  Rolling code for remote controls and 

keypads.

 

 

  Fixed code for other accessories with over 

16 millions possible combinations.

 

 

  Silent alarm possible.  

  Anti jamming function, programmable.

 

 

  Arm/disarm confirmation on outdoor & 

indoor siren.

 

 

 Doorbell 

function.

 

 

  Keypad locking in case of multiple 

erroneous codes.

 

 

  Volume set up for integrated speaker 

sound confirmations.

 

 

  Tamper protection connectable for 

maintenance.

 

 

  5 different user codes (main/secondary 

user, maid, temporary code)   

  Event log showing last 20 occurrences.

 

 

  Dimensions: 265mm (L) x 180mm (W) x 

65.mm (H)

 

 

  Weight : g

 

 

  Power by normal alkaline batteries: 

4*Alkaline battery “D cell” 1.5V  

  Battery life: 2 years

 

 

  Power adaptor connection for permanent 

display (batteries in rescue)

 

 

 

Remote Control HA2000R 

  4 functions: Away Arm, Home Arm, 

Disarm and Panic.

 

 

 Weatherproof

 

IP44  

  Weak battery signal

 

 

  Power : Lithium battery “CR2032” 3.0V 

180 mA/H  

  Battery life: 3 years  

  Bi-color LED: Red for transmission signal 

and Green for weak battery

 

 

  Rolling code among 16 777 216 

Combinations

 

 

  Dimensions: 65mm (L) x 38mm (W) x 

15.00mm (H)

 

 

  Weight : 35g

 

 

 

Open contact HA2000M  

  Weak battery detection

 

 

  Supervised: random signal 30 min to 50 

min

 

 

  Terminal for connecting extra wired 

detectors (NC loop)

 

 

  Double tamper protection : back mount + 

cover

 

 

  LED light: Default & Test mode.

 

 

  Transmitted signals: Opening, Closing, 

Weak battery, Tamper, Tamper closed, 
Supervision and Test Mode.

 

 

  Battery life: Over 3 years assuming 50 

transmissions / day. Roughly 5 years 
under normal use. 1 month after weak 
battery signal. Lithium battery 1/2 AA 3.6V 
1000mAH

 

 

  Space Tolerance against magnet : 30mm 

max

 

 

  Dimensions : 103mm (L)*31mm 

(W)*20.5mm (H)

 

 

PIR Detector

 

HA2000P 

 

  Analysis by Conversion A/N (MSLT), 

temperature compensation Protection 
High Frequencies (magnetic and radio 
interferences)

 

 

  Detection range: 90° over 12 meters, 19 

sectors with 9 on same line

 

 

  Supervision: Random 30 min to 50 min

 

 

  LED light and button: Default & Test 

Mode.

 

 

  Transmitted signals: Opening, Closing, 

Weak battery, Tamper, Tamper closed, 
Supervision and Test Mode.

 

 

  White lens reflecting up à 6000 lux (solar 

rays, vehicle beams…)

 

 

  Double Tamper protection : rear mount + 

cover

 

 

  Battery life: Over 3 years assuming 50 

transmissions / day. Roughly 5 years 
under normal use. 1 month after weak 
battery signal. Lithium battery AA 3.6V 
2400mAH  

  Weak battery detection

 

 

  Dimensions: 93mm (L)*64mm (W)*42mm 

(H)

 

 

 

Remote keypad HA2000K 

  6 functions: Away arm, Home arm, 

Disarm, Medical, Fire and Panic.

 

 

  LED confirming: Transmission, fault, Test 

mode, Control panel status and Weak 
battery

 

 

 Backlit 

keypad

 

 

  Weatherproof IP 44  

 Tamper 

protection

 

 

  Power: lithium battery CR2032,  3V 

220mA/H  

  Battery life: Over 4 years assuming 8 

transmissions per day.

 

 

  Rolling code among 16 777 216 

Combinations

 

 

  Dimensions: 122mm (L) x 93mm (W) x 

25mm (H)  

Summary of Contents for HA2000










































Reviews: