A flashing cursor will underline the first character of
the menu selected; the total menu list consists of:
A w a y
A r m
H o m e A r m
W
a l k T e s t
L o g
PROBLEM?
8
Do not HESITATE to call us via our assistance hotline (at the end of the notice). Our technicians will have the pleasure to
help you make a perfect installation.
These items can be scrolled through by using the
“
S
”, “
T
”
keys.
II.
Alarm
ON
Mode
1. Arming the system
If the system is in Disarmed mode, to arm the system.
Step 1.
Enter your PIN code and press
“OK”
within 10 seconds. The display will
show
:
A w a y
A r m
H o m e A r m
W
a l k T e s t
L o g
and the cursor stays at
“ Away Arm”
Step 2.
Press
“OK”
Step 3.
The screen will go blank and Exit Delay
counts down from the user-defined time
setting with a series of pips.
<
<
N
N
O
O
T
T
E
E
>
>
)
During Exit Delay period, pressing
“OK”
to wake up the display showing:
T i m e t o E x i t
1 0 s e c
The counting down Exit Delay is
displayed on the left side of the 2nd line.
Step 4.
When the Exit Delay time is up, the
Control Panel will sound a long beep.
Now, the system is in Arm mode.
<
<
N
N
O
O
T
T
E
E
>
>
)
The system can also be armed by using
the Remote controller or the Remote
Keypad.
)
If the Outdoor Bell Box is included in the
system, it will beep once and the strobe
will flash once after the Exit Delay has
expired.
2. Stopping the Exit Delay
The Exit Delay can be stopped by disarming the
system.
Step 1. Press “
“
Step 2.
The screen will ask you to enter the PIN
code. In addition, the counting down Exit
Delay is displayed on the left side of the
2
nd
line.
Step 3.
Enter your PIN code and then
press
“OK”. “Alarm off”
will be displayed on
the screen and the system returns to
Disarmed mode.
<
<
N
N
O
O
T
T
E
E
>
>
)
The Exit Delay can also be stopped by
pressing the
“Disarm”
button on the
Remote Controller.
)
If the Exit Delay period times out before
the code can be entered, the system will
arm.
3. Extend the Exit Delay
During the Exit Delay period, the delay time can be
extended by pressing the
“ARM”
button on the
Remote Controller and the Remote Keypad. Each time
the
“ARM”
button is pressed, the delay time starts
counting from the beginning.
III.
Alarm
off
mode
1. Disarming the system
To disarm the system
If the system is in Arm mode or Home mode, enter
your PIN code and press
“OK”
. If the PIN code is
correct, the Control Panel will sound 2 short beeps and
return to Disarmed mode.
The screen will show.
A l a r m
O f f
<
<
N
N
O
O
T
T
E
E
>
>
)
The system can be disarmed by using
