background image

 

 

 

   

PROBLEM?   

 

 

 

 

 

10

  

Do not HESITATE to call us via our assistance hotline (at the end of the notice). Our technicians will have the pleasure to 

help you make a perfect installation.

 

z

 

During the Entry Delay period, if a sensor with 
Instant attribute is triggered, the Control Panel will 
activate the alarm immediately, otherwise the 
control Panel will not respond. 

2. Disarmed Mode 

z

 

In the DISARMED mode; if a 24Hour alarm, Fire 
alarm, Personal Attack alarm, and Tamper alarm is 
triggered, the Control Panel will activate the alarm 
immediately. 

z

 

If any sensors other than the above are triggered, 
the Control Panel will not respond. 

z

 

If an 

“Entry”

 Door Contact or PIR Detector is 

triggered, the Control Panel will sound a ding-
dong door chime, ( if Door Chime function is 
enabled) 

z

 

Dual-Key Alarm Activation: 

z

  Personal Attack Alarm: 

A Personal Attack alarm can be triggered 
at the Control Panel by pressing keys 1 
and 3 simultaneously for 2 seconds. 

z

 Fire 

Alarm: 

A Fire alarm can be triggered at the 
Control Panel by pressing keys 4 and 6 
simultaneously for 2 seconds. 

z

 Medical 

Alarm: 

A Medical alarm can be triggered at the 
Control Panel by pressing keys 7 and 9 
simultaneously for 2 seconds. 

3. Home Mode 

z

 

If a 

“Burglar”

 Door Contact or PIR Detector is 

triggered, the alarm will sound immediately. 

z

 

If a 

“Home Omit”

 Door Contact or PIR Detector 

is triggered, the Control Panel will not respond. 

z

 

If an

 “Entry” 

Door Contact or PIR Detector is 

triggered, the Control Panel will activate the alarm 
providing the Entry Delay has expired. 

z

 

If a 

“Home Delay”

 Door Contact or PIR Sensor is 

triggered, the Control Panel will activate the alarm 
providing the Entry Delay has expired. 

z

 

If the 24 HR, Fire alarm, Personal Attack Alarm 
device is triggered, the Control Panel will activate 
the alarm immediately. 

During Entry Delay period, 

z

  If a Door Contact or PIR with instant 

attribute is triggered again, the Control 
Panel will activate the alarm immediately. 

z

 If 

“Home Delay”

 Door Contact or PIR is 

triggered, the Control Panel will ignore it. 

z

  If a Door Contact or PIR with Non-Instant 

attribute is triggered, the Control Panel 
also ignores it. 

z

 

Dual-Key Alarm Activation: 

z

  Personal Attack Alarm: 

A Personal Attack alarm can be triggered 
at the Control Panel by pressing keys 1 
and 3 simultaneously for 2 seconds. 

z

 Fire 

Alarm: 

A Fire alarm can be triggered at the 
Control Panel by pressing keys 4 and 6 
simultaneously for 2 seconds. 

4. Alarm Definition 

“Burglar Alarm” 

1.  An alarm condition where the Control Panel, 

External Siren are activated in concert, where 
a burglar message is transmitted (if Auto-
Dialer is available) 

2.  The Control Panel will sound swept frequency 

alarm tone in high volume. 

“Fire Alarm” 

1.  An alarm condition where the Control Panel, 

External Siren are activated in concert, where 
a Fire message is transmitted (if Auto-Dialer is 
available) 

2.  The Control Panel will sound pulsed fire alarm 

output in high volume. 

“Personal Attack Alarm” 

1.  An alarm condition where the Control Panel, 

External Siren are activated in concert, where 
a Personal Attack message is transmitted (if 
Auto-Dialer is available) 

2.  The Control Panel will sound swept frequency 

alarm tone in high volume. 

3.  This alarm can’t be silenced by the Remote 

Controller. 

“Internal Alarm” 

1.  An alarm condition where only the Control 

Summary of Contents for HA2000










































Reviews: