Step 3.
Release both the “
S
” key and the
“
RESET BUTTON
” when a long beep is
heard, “
Enter Code
” will be displayed.
Step 4.
Press the “
” key and all codes will be
reset.
PROBLEM?
18
Do not HESITATE to call us via our assistance hotline (at the end of the notice). Our technicians will have the pleasure to
help you make a perfect installation.
z
If
“
”
key is pressed, then the unit will
revert to normal alarm on mode.
z
If more than 17 incorrect keys entered,
then the unit will revert to normal alarm on
mode.
2. Event Log Clear
The Control Panel can clear all memorized log without
resetting programmed parameters by the following
sequence:
Step 1.
Disable tamper protection by putting the
Control Panel into Programming Mode.
<
<
N
N
O
O
T
T
E
E
>
>
)
The Programming Mode will
automatically quit after 10 minutes if no
keys are pressed.
Step 2
. Press the “
S
” key and then the “
RESET
BUTTON
” simultaneously.
Step 3.
Release both the “
S
” key and the
“
RESET BUTTON
” when a long beep is
heard, “Enter Code” will be displayed.
Step 4.
Enter the following key sequence:
“
STSTSTST
”, OK
Step 5.
Press the “
#
” key to see the display
requesting you to “
Enter Code
”
Step 6.
Enter key 7 and 9
Step 7.
All logs cleared and the display shows ”
!! Clear Log !!
”.
z
If
“
”
key is pressed, then the unit will
revert to normal alarm on mode.
z
If more than 17 incorrect keys entered,
then the unit will revert to normal alarm on
mode.
3. Reset to Factory Default Setting
The Control Panel can clear all programmed
parameters by the following sequence:
Step 1.
Disable tamper protection by putting the
Control Panel into Programming Mode.
<
<
N
N
O
O
T
T
E
E
>
>
)
The Programming Mode will
automatically quit after 10 minutes if no
keys are pressed.
Step 2.
Press the “
S
” key and then the “
RESET
BUTTON
” simultaneously.
Step 3.
Release both the “
S
” key and the
“RESET BUTTON” when a long beep is
heard, “Enter Code” will be displayed.
Step 4.
Enter the following key sequence:
“
STSTSTST
”, OK
Step 5.
Press the “
“ key
All programmed parameters are reset to factory
default setting.
z
If more than 17 incorrect keys entered,
then the unit will revert to normal alarm on
mode.
IV.
KEYPAD
HA2000K
z
Identifying the parts:
1. Active
LED
2. Status
LED
3. Fault Display LED
4. Slide Out Section
5. Arm
Key
6. Home
key
7.
Key
-to move back one step and status key
8. Disarm
Key
9. #
Key
10.
Key
-to enter programming menu
11. + Key
-press both 7 and 9 to trigger emergency
alarm
12. Fire Key
