D C Z o n e 0 2 B
H
a
l l . . .
. .
. . .
PROBLEM?
5
Do not HESITATE to call us via our assistance hotline (at the end of the notice). Our technicians will have the pleasure to
help you make a perfect installation.
P I R Z o n e 0 3 O
I
. . . . . . . . . . . .
Step 2.
Press
“OK”
when the required device is
found. The display will prompt you to
reconfirm.
Step 3.
Press
“OK”
.
z
A list of options will be displayed to
choose, followed by the device naming
screen menu.
z
If no options are available for the device,
the device naming menu will be
displayed.
Step4.
When the desired changes have been
done , press
“OK”
to confirm, the screen
will return to the previous list.
<
<
N
N
O
O
T
T
E
E
>
>
)
If
“Edit Device”
menu is chosen while
no device has been installed, the display
will show
“No device available”
for 2
sec. and return to the
“/- “
menu.
)
if the end of the display is encountered
then the screen will display:
S
E N D
)
Press
“ “
anytime to exit if you do not
want to make any edition and the screen
will return to the previous list.
3.Remove Devices
Adding a device a second time is prohibited unless it is
removed from the system first. To delete a device,
choose
“Remove Device”
in the
“/-“
menu.
The display will show:
S T A R T
T
Step 1.
Use
“
S
”, “
T
”
keys to scroll the display.
All the used zones with the device names
are listed in order of the zone number.
R C Z o n e 0 1 P
J o h n . . . . . . . .
D C Z o n e 0 2 B
H a l l . . . . . . . .
P I R Z o n e 0 3 O I
. . . . . . . . . . . .
<
<
N
N
O
O
T
T
E
E
>
>
)
If the end of the display is encountered
then the screen will display:
S
E N D
Step 2.
Press
“OK”
when the required device is
found. The following prompt message
will be displayed for you to reconfirm.
P I R Z o n e 0 3 O I
R e m o v e ( O k ? )
Step 3.
Press
“OK”.
Deleting a device is now
completed. The screen returns to
previous device list.
<
<
N
N
O
O
T
T
E
E
>
>
)
If the selected sensor/zone is not what
you want to delete,
press
“
“
to exit,
the device list is again displayed for you
to make another selection.
)
If
“Remove Device”
menu is chosen
while no device has been installed, the
display will show
“No device available”
for 2 sec. and return to the
“/- “
menu.
4. Program Siren
If an outdoor Bell Box, Auto Dialler or Universal
Receiver etc. is to be included in the system, it should
be programmed first by the Control Panel, so that the
Control Panel can communicate with these auxiliary
devices.
To program the Bell Box, select
“Program Siren”
in
the
“/-“
menu.
L e a r n S i r e n
S i r e n A / T
O n
S i r e n A / T
O f f
