ELECTRICAL CONNECTON
TR 23
370W - 1/2 Hp 1 Ph 220-240 V - 50 Hz CE
TR 510
370W - 1/2 Hp 1 Ph 110-120 V - 60 Hz UL
TR 710
550 W - 3/4 Hp 1 Ph 110-120 V - 60 Hz UL
ATTENTION
Ensure that the electrical rating of the disposer purchased corresponds to the electrical supply line.
Ensure that the electrical supply plant is provided with an earth (ground) in accordance with the regulations,
codes and ordinances in force.
Ensure that the electrical supply plant is provided with safety devices in accordance with the regulations, codes
and ordinances in force.
Ensure to have an electrical socket near the sink. Contact a qualified electrician if such a socket is missed.
Do not modify the disposer’s plug if it is not fitting the socket, but do install the proper socket.
Check periodically out the power cord of the disposer. In case of deterioration contact a qualified electrician to
replace it.
]
AIR SWITCH INSTALLATION INSTRUCTIONS
The air switch kit includes the following parts:
A – air switch
B – 1 metre of clear PVC air tube (100 cm.)
C – Moulded metallic push button bellows
D – Metallic L-Shape clamp
Instructions:
Drill a
Ø
mm. 35 hole in the kitchen work top or corner of the sink at
the most convenient point for use;
Unscrew the mounting ring of the push button bellows (C);
Insert the push button bellows and the rubber washer into the hole
which has just been made;
Tighten the mounting ring, locking the push button bellows;
Attach one end of the air tube (B) over the spout of the push button
bellows and the other end over the spout of the air switch (A) located
inside the base of the disposer;
Insert the disposer’s plug into the socket;
The disposer is now ready to use: one firm press on the push button
bellows will switch the disposer on. Another press will turn it off.
D – Metallic L-Shape clamp to fit eventually the air switch push button under
the sink.
Warning: do not use abrasive or aggressive cleaners to clean the push
button bellows.
SAFETY INSTRUCTIONS
Pay particular attention when the disposer is operating in presence of children;
Do not use the sink containing the food disposer for purposes other than food preparation or washing dishes (such as baby bathing or
washing hair);
Do not insert hands or fingers into disposer, not even by using an extension instrument (such as a ladle);
In order to push the food waste into disposer use the proper conveyor available as an optional;
Do not put into disposer metal objects, glass or china, plastic or plastic wrap, chemical drain cleaners, paper or cardboard, clam or oyster
shells, large bones, toothpick, metal bottle tops, laces, tissues or similar products, excessive quantities of fat or greasy, hot liquids – This will
ensure not to damage the unit, to prevent the expulsion of materials during use and to avoid the risk of blocking the domestic drain line;
Replace the splashguard when worn to help prevent entry/ejection of material/splashing water;
In case of jamming turn always off disposer and disconnect the plug before trying to solve the problem or remove any object fallen by chance
into disposer;
Do not store flammable items such as rags, paper, aerosol cans near disposer;
Do not store or use gasoline or other flammable vapours and liquids in vicinity of disposer;
Do not store or use aggressive chemicals in vicinity of disposer;
S
AFETY
D
EVICES
^
The unit is endowed with a system fit for preventing overload.
Overloading usually occurs when an unknown object falls into disposer and/or when an excess of food waste is simultaneously put therein thus
preventing the motor from running correctly. In such cases the disposer will automatically switch off.
If this happens:
Switch off the disposer and disconnect the disposer’s plug;
Remove the unknown object or the material in excess;
Insert the hexagonal wrench, provided together with the unit, into the centre
hole on the bottom of the disposer and turn it anti and clockwise (see 1);
Wait 5/10 minutes;
Press the red button “reset” switch located on the bottom of the disposer (see
2);
Insert the plug in the electrical socket and start up normally;
3
18
MODEL FWD 380
380 W - ½ Hp 1 Ph 220-240 V - 50 Hz CE
MODEL FWD 600
600 W - ¾ Hp 1 Ph 220-240 V - 50 Hz CE
MODEL FWD 600 HS
600 W - ¾ Hp 1 Ph 220-240 V - 50 Hz CE
