Eco-King HWB-299, Installation And Service Manual

Page: 72 / 124

E93.1801EN171 HWB installation manual 72
13.2.3 P
ROTECTED MENU ITEMS
Some menu items are protected and only accessible via a password* The following password screen will then
appear:
Users are only allowed to change parameters not needing a password. Installers have to use the password 1122 to change parameters
protected by a password.
Changing protected/safety parameters should only be conducted by experienced, licensed
water heater operators and mechanics. Hazardous burner conditions can happen with im-
proper operations that may result in PROPERTY LOSS, PHYSICAL INJURY, or DEATH.
Enter the password with the following steps:
1. Use the UP/DOWN
↑↓
button to adjust the first number
2. Press CONFIRM or RIGHT
→
to confirm and to go to the following number
Repeat this action for all numbers to enter the password.
During this action, if you want to return to the previous screen, just press MENU or ESC to cancel. After
the password is entered in correctly, the menu item will become available.
The following menu items require a password*:
(Sub) Menu item Location inside menu
Climatic Compensation via ‘Heating > Climatic compensation’
Water heater via ‘Settings > Water heater’
13.2.4 D
E
-
AERATION
S
EQUENCE
The “De-Aeration” sequence is a safety function that starts at every power ON of the water heater and is used to
remove the air from the heat-exchanger. The DAir sequence does not start after a general reset (like the locking
error reset or 24 hours reset)
The display will show the following string during DAir sequence:
• “Dair Running”
• “Dair Error Water Pressure”
13.2.5 L
ANGUAGE SETTINGS
The display has a number of different language options, such as English, French, Chinese and Italian.
BE AWARE: DO NOT set the language to the Chinese Language if you are not familiar with this language. Contact
Eco King Heating Products Inc. for instructions if the display is set to Chinese and needs to be reset to another
language.
Please follow the next steps, which describe how to set the display to a specific language:
1. From the Status Overview, press the MENU button once
2. Select “Settings” (press UP/DOWN
↑↓
to highlight/select) and press the CONFIRM button
3. Select “General Settings” (press UP/DOWN
↑↓
to highlight/select) and press the CONFIRM button
4. Select “Language” (press UP/DOWN
↑↓
to highlight/select) and press the CONFIRM button
5. Select the desired language (press UP/DOWN
↑↓
to highlight/select) and press the CONFIRM button
Language
English
Italiano
中文
INTERNATIONAL
▼
WARNING