Eco-King HWB-299, Installation And Service Manual

Page: 16 / 124

E93.1801EN171 HWB installation manual 16
3 TECHNICAL DATA WATER HEATERS
Functional introduction
The HWB water heaters are central heating water heaters with a maximum high efficiency. Such a performance
can be reached by, amongst other things, using a special heat exchanger made of stainless steel. This allows the
flue gases to cool down below the condensation point, and so release extra heat. This has an immediate positive
impact on the efficiency.
The water heater is set for Natural gas.
Fuel used should have Sulphur rates with a maximum annual peak over a short period of time of 150 mg/m
3
(110
ppm average) and an annual average of 30 mg/m
3
. (22 ppm average)
Water heater control includes:

Cascade control for up to sixteen water heaters

Remote operation and heat demand indication from each water heater

Anti-Legionnaires’ disease function (Only available at DHW mode 1, cascaded Heaters)
Connections for:

Water heater pump

PWM control for external water heater pump.

System pump

External flow switch or external safety device.

Modbus

External system sensor

DHW sensor.

External Ignition coil
Location of version numbers
Burner Controller Hardware Version
– To be found on the second line of the white sticker on the side of the burner controller.
e.g. 957MN15_3Rh4a
Burner Controller Software Versions
– Press the menu button , go to Information and then to Software Versions.
Information
Software Versions
Water heater Status
Water heater History
Error Log
i
Software Versions
Display [63EF 83BC]
Water heater [5C79 14A9]
Device Group 900MN