Eco-King HWB-299, Installation And Service Manual

Page: 105 / 124

E93.1801EN171 HWB installation manual 105
 
 
4. Set parameter 138
Parameter 138 has to be changed in the software of the boiler according to the following table:
NB: fan speed is given to verify.
Controller version Boiler model
fan speed
high fire
Parameter 138
for propane (LP)
INTERNAL
IGNITER
299MBH Version HWB-299 6450 51
399MBH Version HWB-399 6700 53
499MBH Version HWB-499 7600 55
EXTERNAL
IGNITER
EXTERNAL IGNITER
299/399/499 MBH
HWB-299 6450 51
HWB-399 6700 53
HWB-499 7600 55
1. From status screen, press MENU button once.
2.
Press UP/DOWN ↑↓ to select "Settings" and press ENTER
.
3.
Press UP/DOWN ↑↓ to select "Boiler Settings" and press ENTER
.
4. Enter installer
password by pressing UP/DOWN ↑↓ and LEFT ← /RIGHT→ .
5.
Press UP/DOWN ↑↓ to select "Boiler Parameters" and press ENTER
.
6.
Press UP/DOWN ↑↓ to select parameter "(138) Appliance Type" and press ENTER
.
7.
Press UP/DOWN ↑↓ to change the
parameter according to the table, and press ENTER .
8. To return to the status screen, press ESCAPE or MENU 4 times, or RESET once.
In case a CSD kit (gas pressure switch kit) is mounted (on the gas valve),
adjust the right-hand pressure switch to 9.0 inch. w.c !
Check during start-up of the boiler no gas mixture is leaking
on all parts that have been apart!
5. Adjust the CO
2
/ O
2
percentage
Perform C/ O
2
adjustments according to the procedures in the installation manual; § 18.2, using the values in table
§ 18.1.1.
6. Confirmation
When finished:
- Apply the corresponding sticker at the appropriate position in the boiler.
- Mark the box for the used gas type.
- Mark the box, indicating that the correct value has been set for the
appliance type.
Table 18. 3
Picture 18. 6
Please ensure the water heater is clearly labelled if operating on propane supply!
It is possible to improve the ignition spark by using an external ignition transformer.
Available on request, see the accessories list.
E73.1628.901
WARNING!
WARNING!
WARNING!
NOTICE