ECKELMANN UA 410 D, Operating Instruction

Page: 83 / 142

Operation of UA 410 D
75 Firmware V1.40 - Doku 2.1 06. April 2016
7.3.4 Activating service mode
For repair and maintenance work, service personnel can deactivate the remote alarm function of the system
centre and of the store computer for a limited period using the service mode.
The activation of the service mode must only be carried out by service personnel.
If there are still pending alarms (with the priority 1..2) after the time of the Service Mode has elapsed,
the audible warning devices and the alarm relays are activated and the alarms are forwarded using
the automatic transmission of alarms.
7.3.4.1 System centre CI 4x00
Activating/deactivating service mode
Service-Mode
Verzögerung [Min.]
Fernalarmierung
für 1..255 Minuten
unterdrücken
255
Service-Mode wieder aufheben
Button drücken
und
0 Minuten
eingeben
The service mode can only be activated if the system centre has previously been unlocked; see
chapter 7.3.3.1.
7.3.4.2 Store computer CI 3x00
Activating/deactivating service mode
Step 1: Select menu item 9 "Parametrisation" in the main menu.
Step 2: Select menu item 3 "Lock-down" in this menu.
Step 3: Tap the buttons MODE + ENTER (
↵
) simultaneously to open the screen for the suppression of the
remote alarm signalling and input the service duration (1..255 minutes).
The service mode is now activated for the duration entered above.
Step 4: The service mode can be reset / revoked again by the input of 0 minutes.